Download Epson L3110 Resetter Without Password

Last Updated: September 2026 — Guide checked and refreshed with the latest working download link and troubleshooting steps.

Epson L3110 Resetter Tool Download and fix Red Light Blinking

The Epson EcoTank L3110 is an all-in-one ink tank printer that is popular in India. It is known for its low cost per page and efficient printing, thanks to its high-capacity ink tank system. The L3110 is compact and affordable, making it a great option for home or small office use. It supports both Windows and Mac operating systems and comes with a two-year warranty for added peace of mind. Additionally, it offers convenient wireless connectivity, making it easy to print from a variety of devices. The L3110 delivers high-quality prints and can handle a variety of paper sizes, making it a versatile choice for your printing needs. Resetter printer l3110.

The Epson EcoTank L3110 resetter is a software tool that can be used to reset the ink level monitoring and maintenance functions of the printer. The resetter can be useful if you are experiencing issues with the ink level monitoring system, such as error messages or incorrect ink level readings.

To use the Epson EcoTank L3110 resetter, you will first need to download the software from a reliable source. After downloading, you will need to follow the instructions provided to install and run the resetter. The process may involve resetting the printer’s ink counters or adjusting the ink level settings in the printer software.

It’s important to note that resetting your Epson EcoTank L3110 printer may void your warranty and can also cause issues with the printer’s performance. It’s always best to consult the printer manual or the manufacturer’s website for the recommended solution to any issues you are experiencing with the printer.

Why Does the Epson L3110 Show “Service Required” or Blink Red Lights?

Every Epson L3110 has an internal waste ink pad counter. During printing and self-cleaning cycles, small amounts of ink are absorbed by internal pads. Epson’s firmware tracks this usage, and once the counter hits its pre-set limit, the printer locks itself with a “Service Required” message or two blinking red lights — even if the pads themselves aren’t actually full. This is a safety measure to prevent ink overflow inside the printer, not a sign that your printer is broken.

The resetter (adjustment program) simply resets this counter back to zero in software, so the printer “thinks” the pads are fresh again. It does not physically clean or replace the pads — if your printer has genuinely been printing for years, it’s worth periodically checking and cleaning the actual waste ink pads too, not just resetting the counter.

Epson L3110 Service Required Error Solution Is Here

Follow these simple Steps to reset epson l3110

1. Download WinRAR and the Epson L3110 Reset Tool.
2. Temporarily disable your antivirus — reset tools are frequently (and incorrectly) flagged since they alter system counters.
3. Extract the downloaded ZIP/RAR file to its own folder.
4. Connect the printer directly to your PC with a USB cable (avoid USB hubs).
5. Run the Adjprog.exe file as Administrator.
6. Copy the Machine ID shown in the program.
7. Open WLGen_Epson L3110.exe.
8. Click Licence Manager.
9. Click Add Licence.
10. Paste the Machine ID and click Save.
11. Click Create Licence Key.
12. Copy the generated licence file and paste it into the software folder.
13. Reopen Adjprog.exe, select Particular adjustment mode → Waste ink pad counter, check the boxes, and click Check, then Initialization.
14. Power the printer off and back on — the error should be cleared.

Download the Epson L3110 Reset Tool – You can reset your Epson L-3110 all-in-one ink tank printer. Epson L 3110 is a well-integrated tank printer. Today we will share the Epson reset tool (tuning program) for your Epson L series printer. You can simply reset your Epson L series printer (L3110) using this application. You must follow the steps below to run the Epson L3110 counter reset program. You can download a 100% Genuine Epson L3110 Printer Unlimited Reset Tool. You can also reset several related Epson L-series models using the same tool family — see the compatibility list below.

How to Check Your Epson L3110 Waste Ink Pad Level

Before resetting, it helps to know how full the pads actually are:

1. Open the Adjustment Program (Adjprog.exe) and go to Particular adjustment mode.
2. Select Waste ink pad counter and click Check.
3. The tool shows each pad’s usage as a percentage — if any pad reads close to 100%, that’s what triggered the error.
4. You can also print a Nozzle Check / Status Sheet from the printer’s control panel for a quick health overview, though it won’t show the exact waste-pad percentage.

Resetter Not Working? Common Fixes

• “Communication Error” in Adjprog: Make sure the correct printer model is selected in the tool and the printer is connected via USB, not Wi-Fi.
• Program won’t open: Right-click and “Run as Administrator,” and confirm your antivirus/Windows Defender isn’t silently blocking it.
• Machine ID mismatch or invalid licence: Generate the licence key again — Machine IDs are tied to the specific printer’s serial number and must match exactly.
• Error returns after a few days: This usually means the physical waste ink pads are genuinely saturated; a software reset only buys time; consider having the pads professionally cleaned or replaced.
• Printer not detected: Install the official Epson L3110 driver first, then reconnect the USB cable.

Frequently Asked Questions

Is it safe to reset my Epson L3110 with this tool?

Yes, when downloaded from a trustworthy source and used as directed. It only resets an internal software counter and does not modify hardware. That said, always back up any pending print jobs and use the tool at your own discretion.

Will resetting void my Epson warranty?

Using an unofficial adjustment program can void your manufacturer warranty. If your printer is still under warranty, contact Epson support instead of using a third-party resetter.

Does the resetter work on Windows 11 and Mac?

It works reliably on Windows 7 through Windows 11 (32-bit and 64-bit). There is no native Mac version — Mac users typically need Boot Camp or a Windows virtual machine to run Adjprog.exe.

What other Epson L-series models does this tool support?

The same adjustment program family also resets the L3111, L3115, L3116, L3100, L3101, L3150, L3151, L3156, L3108, L3118, and L3119 models.

Have a different Epson model? Check our guides for the Epson L3210 Resetter and the Epson L3250 Resetter.

Final Thoughts

A “Service Required” error on the Epson L3110 looks alarming but is almost always just a full waste ink pad counter — not a broken printer. Follow the steps above carefully, and if the error keeps coming back within a short time, treat that as a sign to get the physical waste ink pads inspected rather than resetting repeatedly.